Chevrolet Malibu 2007 Especificações descarregar pdf (Página 116)

When trying to start the vehicle if the engine does

not start and the security light comes on, the

key may have a damaged transponder. Turn the

ignition off and try again.

If the engine still does not start, and the key

appears to be undamaged, try another ignition

key. At this time, you may also want to check the

fuse, see Fuses on page 446. If the engine still

does not start with the other key, your vehicle

needs service. If your vehicle does start, the

ﬁrst key may be faulty. See your dealer who

can service the PASS-Key

®

III+ to have a new

key made. In an emergency, contact Chevrolet

Roadside Assistance. See Roadside Assistance

Program on page 481 for more information.

It is possible for the PASS-Key

®

III+ decoder

to “learn” the transponder value of a new

or replacement key. Up to 10 additional keys may

be programmed for the vehicle. The following

procedure is for programming additional keys only.

If all the currently programmed keys are lost or

do not operate, you must see your dealer or

a locksmith who can service PASS-Key

®

III+ to

have keys made and programmed to the system.

See your GM dealer or a locksmith who can

service PASS-Key

®

III+ to get a new key blank

that is cut exactly as the ignition key that operates

the system.

To program the new key do the following:

1. Verify that the new key has “+” stamped on it.

2. Insert the already programmed key in the

ignition and start the engine. If the engine

will not start, see your dealer for service.

3. After the engine has started, turn the key to

off, and remove the key.

4. Insert the key to be programmed and turn

it to on within ﬁve seconds of removing the

original key.

5. The security light will turn off once the key

has been programmed. It may not be

apparent that the security light went on due to

how quickly the key is programmed.

6. Repeat Steps 1 through 5 if additional keys

are to be programmed.

116

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 509 510

Comentários a estes Manuais

Sem comentários