Chevrolet 2013 Impala Police Package Manual de Serviço descarregar pdf (Página 25)

Approximate dimensions for center console area with offset shift lever.

CAUTION: Do not mount aftermarket equipment to plastic cover; remove

cover for mounting equipment. Do not permanently mount

equipment to interfere with the vehicle controls below the

plastic cover.

Plastic Cover

10”

2.5”

7”

9”

10”

5.5”

3”

2.5”

.5”

OFFSET SHIFT LEVER CONSOLE

DIMENSION

Police relay outputs and control circuit connections are located under the right end

of the instrument panel in a 5-foot (1.5 m) coil terminated with three connectors.

Battery power is supplied through two Pre-fuse Assembly fusible links. If the optional

auxiliary battery (K4S) is not present, power to the Pre-fuse Assembly is supplied by

the Primary battery. Three circuit breakers and two control relays are located in the

right rear compartment relay center. The relay center is connected via the body har-

ness to the front compartment customer connections. A 50-amp circuit breaker feeds

power directly from the 100-amp fusible link via a 10-gauge (5.0mm

) wire. Two

30-amp circuit breakers supply power from fusible links through the contacts of the

control relays to 12-gauge (3.0 mm

) wires. Each relay is operated by control leads in

the 5-foot coil in the front compartment. An 8-gauge ground lead is also provided in

the coil. A total of 1320-watts of 12-volt power is available in the front compartment.

1440-watts of 12-volt power is a available at the rear compartment junction block.











WIRING PROVISIONS FOR 12-VOLT

BATTERY POWER SUPPLY

14 | caPrIce 9c1 & 9c3 sPecIaL equIPment - standard

The offset shift lever is located on the floor adjacent to the driver. 10 inches of open

space between seats for aftermarket supplied equipment.

The transmission can be placed into Sport Shift Mode by pressing the Sport Mode

button in front of the shift lever. The message SPORT MODE will appear momentarily

in the DIC to indicate that Sport Mode has been selected. A small, fixed message will

appear at the bottom of the DIC display with the text and will remain while the Sport

Mode is engaged. When operated in the Sport Shift Mode, the transmission will

delay up-shifts and allow earlier down-shifts. In addition, the transmission can sense

enthusiastic driving and may delay up-shifting and down-shifting earlier when

braking. This operation is designed to maximize vehicle performance. To return to

Normal Shift Mode, press the Sport Mode button again. The message NORMAL SHIFT

will be displayed in the DIC. Normal Shift Mode is recommended for normal highway

or freeway driving as it provides optimum fuel economy.

Refer also to the Owner’s Manual.

Pushing the StabiliTrak button turns OFF Traction Control and places StabiliTrak in

Performance Mode, permitting more aggressive driving before StabiliTrak will

engage. Push and hold 5 seconds for StabiliTrak and traction control to turn off. Push

the button again to reactivate normal StabiliTrak operation.

9C1 POLICE PACKAGE PPV –

SHIFT LEVER

Sport Mode

StabiliTrak

OFF

The shift lever is located in the center console between the front seats.

The transmission can be placed into Sport Shift Mode by moving the shift lever over

from Drive (D) to the RH side of the shift quadrant. The message SPORT MODE will

appear momentarily in the DIC to indicate that Sport Mode has been selected. A

small, fixed message will appear at the bottom of the DIC display with the text and

will remain while the Sport Mode is engaged. When operated in the Sport Shift

Mode, the transmission will delay up-shifts and allow earlier down-shifts. In

addition, the transmission can sense enthusiastic driving and may delay up-shifting

and down-shifting earlier when braking. This operation is designed to maximize

vehicle performance. To return to Normal Shift Mode, slide the shift lever from the RH

side into Drive (D) at the LH side of the quadrant. The message NORMAL SHIFT will be

displayed in the DIC. Normal Shift Mode is recommended for normal highway or

freeway driving as it provides optimum fuel economy.

The 9C3 (only) Sport Shift Mode also includes Active Select Mode to permit manual

shifting of the transmission. Refer also to the Owner’s Manual.

Pushing the StabiliTrak button turns OFF Traction Control and places StabiliTrak in

Performance Mode, permitting more aggressive driving before StabiliTrak will

engage. Push and hold 5 seconds for StabiliTrak and traction control to turn off. Push

the button again to reactivate normal StabiliTrak operation.

–

9C3 DETECTIVE POLICE PACKAGE –

SHIFT LEVER

StabiliTrak

OFF

2013 Chevrolet MuniCipal vehiCles teChniCal Manual

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 196 197

Comentários a estes Manuais

Sem comentários

Chevrolet 2013 Impala Police Package Manual de Serviço Página 25

Comentários a estes Manuais

Manuais e produtos relacionados com Automóveis Chevrolet 2013 Impala Police Package